Table of Contents
Advertisement
CentreWare® Internet Services
7.
Select Apply to save the changes.
Configuring Wi-Fi Direct
TM
Wi-Fi Direct
allows you to enable your wireless devices, such as notebooks, mobile phones and PCs to
establish wireless connectivity without the need for a wireless router, access point, or Wi-Fi hot spots.
1.
At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press Enter.
3.
Select Properties.
4.
If prompted, enter the admin for the ID and 1111 for the Password, and select Login. Click
Properties.
5.
In the Network Settings link, select the Wi-Fi link. Then select the Wi-Fi Direct
6.
Select On for Wi-Fi Direct
7.
Enter the following:
•
Device Name
•
IP Address
•
Activate or Deactivate the Group Owner
•
Network Key
8.
Select Apply and then OK.
Setting the Ethernet Speed Using CentreWare Internet Services
1.
At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press Enter.
3.
Select Properties.
4.
If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
Click Properties.
5.
In the Network Settings link select the General link.
6.
Select one of the following speeds from the Ethernet Speed drop-down menu:
•
Automatic
•
10 Mbps (Half Duplex)
•
10 Mbps (Full Duplex)
•
100 Mbps (Half Duplex)
•
100 Mbps (Full Duplex)
7.
Select Apply to save the changes.
The change to Ethernet Speed rate will take effect after System Reboot screen appears.
8.
Select OK.
9.
When the Acknowledgement screen displays, select OK.
10. Reboot the machine.
18
Xerox® Phaser® 3052/3260
User Guide
TM
using CentreWare Internet Services
TM
.
TM
link below that.
Hide quick links:
Advertisement
Table of Contents
