3.2
3.2.1
Turning Power On
The procedure is as follows.
Procedure
1
Press the "I" side of the Power switch
on the right of the printer; the power is
turned on.
3
2
Message "Diagnosing ..." is displayed
in the LCD on the control panel.
Confirm that this display changes from
"Please wait ..." to "Ready to Print" and
the Online lamp is lit.
When message "Please wait ..." is displayed on the LCD,
the system is getting ready for printing. In this period,
printing is impossible.
If an error message appears on the LCD, refer to "6.7 When the Error LED is Litor Blinking" to cope
with the error.
54
Turning Power On and Off
Ready to Print