Table of Contents
Advertisement
When moving the machine, do not tilt it more than 10 degrees. If tilted excessively,
the machine may fall over and cause injuries.
Other Precautions
The machine is capable of operating normally within the following recommended
°
environmental limits. Temperature range: 10 - 32
C; relative humidity: 15 - 85% (no
°
condensation). If operating the machine at a temperature of 32
C, the relative
humidity should not exceed 70%. If the relative humidity reaches 85%, the
°
temperature should not exceed 28
C.
Do not place the printer in a room where there are sudden fluctuations in temperature as condensation
may occur within the printer and print quality will deteriorate.
Do not expose the machine to direct sunlight. Exposure to direct sunlight can
adversely affect the machine performance.
Power Requirements and Earth Connections
The power specifications are listed below. The specifications that apply to your
machine depend on your machine configuration. Connect the power plug only to a
properly rated power outlet. Otherwise, it can cause fire or electric shocks. If in
doubt, contact your FujiXerox or dealers.
Rated voltage: 220-240 V
Rated frequency: 50/60 Hz
Never use multi-plug adaptors to plug multiple power plugs in the same outlet. Be
sure to operate the machine on a sole-use receptacle. Multiple connectors can
cause the outlet to overheat and cause fire.
xiii
Advertisement
Table of Contents
