Table of Contents
Advertisement
5.3 List of Items on the Menu Screen
Menu
Panel Settings
XPL2 Font List
Job History
5.3.5
Network
This menu allows you to specify network-related settings. This menu will only be
displayed if you have installed the optional network expansion card.
You cannot change the settings on this menu if you entered the Menu screen when the printer is
printing.
The settings will not take effect if you do not restart the system. After the setting, you have to
5
switch off the printer and then switch it on again.
Menu
Ethernet
110
Shows the contents of the settings for the individual control panel
menu.
Shows the information of the fonts that can be printed in XPL2 data.
Shows information related to the print jobs processed (a maximum of
22 print jobs). You can check if a particular print job has been printed
successfully or not.
"3.10.2 Printing Job History Report" for an example.
Specify the Ethernet communications speed and mode.
10Base/Half
10Base/Full
100Base/Half
100Base/Full
Switches automatically to 10Base/Half, 10Base/Full, 100Base/Half
or 100Base/Full.
Auto (Default)
Description
Description
Advertisement
Table of Contents
