Turning The Power On And Off; Turning The Power On - Xerox 8264E User Manual

Unwinder / Winder Operation
No. Part Name
1. AC inlet
2. Power cable
3. Insert the AC power cable plug to an AC power outlet.

Turning the Power ON and OFF

The following section provides procedures for setting the Unwinder / Winder power ON and
OFF.

Turning the Power ON

Turn the power ON by following the instructions below.
1. Set the Unwinder / Winder power switch to the ON position. The operation lamp will light.
Figure 10. Set the Power Switch to the ON Position
No. Part Name
1. Unwinder / Winder Power Switch
2-6 8264E Color Wide Format Printer 100kg Unwinder / Winder
User Guide