Table of Contents
Advertisement
1.1 Configuring the Printer
Setting the IP Address
Set the IP address with four sets of values (in decimal) separated with a period. Set the numbers from
0 to 255.
...from previous page
1
10
Press
once.
Press Eject/Set once.
Press
or
until the desired value (e.g.192) is reached. At this time,
if you keep the button pressed down, the value will change in values of 10.
Press
once to move the cursor ( _ )
to the next value.
Repeat Steps
and
IP address.
Press Eject/Set once.
The following screen is displayed after three seconds.
Press Cancel once. The screen returns to the screen
of the next lower level where IP Address is displayed.
Settings for this example
IP Address
Subnet Mask
Gateway Address
to specify the
192.168.1.100
255.255.252.128
192.168.1.254
If you are unsure of
the level of the menu
halfway through the
operation, refer to
"Appendices B
Control Panel Menus"
to confirm the overall
structure of the menu.
Advertisement
Table of Contents
