Table of Contents
Advertisement
Switch it off, and if the interference disappears, the machine is the cause of radio
interference. Perform the following procedure until the interference is corrected.
Move the machine and the TV and radio away from each other.
Reposition or re-orientate the machine and/or the TV and radio.
Unplug the machine, TV, and radio, and replug them into outlets that operate on
different circuits.
Re-orientate the TV and/or radio antennas and cables until the interference stops.
For an outdoor antenna, you should ask your local electrician for support.
Use coaxial cable antennas.
Operating Precautions
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt
water can cause a fire or shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and
flammable parts get into the machine, they can short-circuit internal components,
and cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch off and unplug the machine.
Contact your FujiXerox or dealers. Operating a debris-contaminated machine can
cause fire or electric shocks.
Never open or remove machine covers that are secured with screws unless
specifically instructed in this manual. A high voltage component can cause electric
shocks.
Do not try to alter the machine configuration, or modify any parts. An unauthorized
modification can cause smoke or fire.
This equipment is certified as a Class 1 laser product under IEC60852-1 (Class 1).
This means that the machine does not emit hazardous laser radiation. Since
radiation emitted inside the machine is completely confined within the protective
housings and external covers, the laser beam cannot escape from the machine
during any phase of user operation. Do not perform any operation apart from the
instructions given in the manual. There may be a danger of laser beam leakage.
xvi
Advertisement
Table of Contents
