8.4 Transporting the Printer
8.4.2
Transporting the Printer
Follow the procedure below to pack the printer.
Prepare a shipping box stored at installation before moving.
When the printer is equipped with the optional cassette feeder and Duplex Module, remove them from
the main unit of the printer before transportation. If they are not attached securely to the printer unit, it
can cause the machine to fall and result in injuries.
For removal and installation of the optional products, refer to "Setup Guide."
Procedure
1
Turn the printer power off.
2
Remove the power cord and all other
cables, such as the parallel cable.
Never touch a power cord with wet hands.
Danger of electric shock exists.
8
When unplugging the machine, grasp the
plug instead of the cord. Forcibly pulling on
a cord can damage it and cause fire or
electric shocks.
162