Faded, Dirty, Uneven, Shadowed Or Wrinkled Output - Xerox DocuPrint 211 User Manual

6.3.2
Faded, Dirty, Uneven, Shadowed or
Wrinkled Output
Condition
The printed image Did you use the recommended paper
is faded type?
Is the paper damp?
Is the EP cartridge deteriorated or
damaged?
Is it time to replace the EP cartridges? Replace the EP cartridges.
Is the EconoMode selected on the
printer driver?
Is the cassette cover removed?
Black dots or stains Did you use the recommended paper
are printed type? Was pre-printed paper or inkjet
paper used?
Is the EP cartridge deteriorated or
damaged?
Verification
6.3 Print Quality Problems
Solution
Replace with paper of the recommended
size and type.
"4.1 Usable and Unusable Paper"
Replace with new paper stock.
"4.2 Loading Paper into a Paper Cassette"
Replace with a new EP cartridge.
"8.1.3 Replacing the EP cartridge"
"8.1.3 Replacing the EP cartridge"
Check under the Graphics Propaties tab on
the printer driver, and change the settings.
Online Help
Close the cover.
"4.2 Loading Paper into a Paper Cassette"
Load only recommended paper type.
"4.1 Usable and Unusable Paper"
Replace with a new EP cartridge.
"8.1.3 Replacing the EP cartridge"
6
123