Table of Contents
Advertisement
Menu
Detect Toner Empty
ID Print
Text Print
When the toner in the EP cartridge runs short, a message appears
on the operation panel display. After the message appears, the
printer sets the number of pages that can be printed.
After printing the set pages, the printer cannot print any more until a
new EP cartridge is set.
off (Default)
Even if the toner is getting low, the printing process continues.
Select to use up the toner of an EP cartridge.
100~1000 pages
Number of pages to be printed after detection of the message can
be set in pages.
Since the printing process continues by default (No printing) even if the toner
is getting low, print dropouts could be caused. To avoid print dropouts, specify
the number of pages you want to print after the message is displayed.
If you specify a large number of pages you want to print after the message was
displayed, it could cause print dropouts. Hence, it is recommended to specify a
small number of pages.
Print the User ID on a specified position.
Off (Default)
Top Left
Top Right
Bottom Left
Bottom Right
Set this for the printer to print data other than the supported PDL
data as text.
Text data is printed on A4 paper. Set the A4 paper into the paper tray.
[Yes]
The data is printed as text.
[No] (Default)
Data is not printed as text.
5.3 List of Items on the Menu Screen
Description
5
107
Advertisement
Table of Contents
