Condition
Printing is
Is the paper damp?
smudged
Did you use the recommended paper
type?
The EP cartridge is deterlorated or
damaged.
Printing is slanted
Are the guide clips of the paper
cassette in the correct positions?
Does the position of the size setting
dial of the paper cassette match the
size of the loaded paper?
Does the paper guide of the Bypass
Tray match the size scale of the
loaded paper?
Verification
6.3 Print Quality Problems
Solution
Replace with new paper stock.
"4.2 Loading Paper into a Paper Cassette"
Replace with paper of the recommended
size and type.
"4.1 Usable and Unusable Paper"
Replace with a new EP cartridge.
"8.1.3 Replacing the EP cartridge"
Adjust the vertical and horizontal guide
clips of the paper tray to cassette correct
positions.
"4.2 Loading Paper into a Paper Cassette"
Adjust the size setting dial of the paper
cassette to the correct position.
Chapter 4 "Loading Paper"
Adjust the paper guide of the Bypass
Tray to the correct position.
"4.3 Loading Paper in Bypass Tray"
6
127