3.9 and Non-standard size (Long) Paper
Procedure
1
Open the bypass tray (
the side guide to the scale of the
loaded paper size (
2
Open the flap, and insert envelopes
until they slightly hit on the insertion
port, turning them as shown in the
3
figure.
Do not load envelopes that exceed the maximum
capacity (10 sheets).
3
Submit a job from an application software.
The printer driver must be set to the initial values.
For details on the procedure, refer to the online help. "Online Help (Keyword: Printing on
Envelopes)"
Using Online Help 3.4.2, "Referring to Online Help from Windows"
Hint for setting in the printer driver
70
).
Open the Custom Paper Size dialog box from the Default Settings tab, then specify
the paper size.
Select the items below in the Paper/Output tab.
Select the size specified in the Custom Paper Size dialog box on the Paper Size,
Paper Tray - Bypass Tray, and Paper Type - Heavy Wt.
), and adjust
Flap