Table of Contents
Advertisement
6.3 Print Quality Problems
Condition
Print is thinned by
rubbing by finger
Wrinkled paper
6
126
Verification
Is the paper damp?
Did you use the recommended paper
type?
Is the paper damp?
Did you use the recommended paper
type?
Is the paper warp?
Are there scraps of paper or other
objects in the printer?
Is the cassette cover removed?
Did you add paper?
Solution
Replace with new paper stock.
Chapter 4 "Loading Paper"
Replace with paper of the recommended
size and type.
"4.1 Usable and Unusable Paper"
Replace with new paper stock.
"4.2 Loading Paper into a Paper Cassette"
Replace with paper of the recommended
size and type.
"4.1 Usable and Unusable Paper"
Switch off the power and remove these
objects from the printer.
If you have difficulties removing these
objects from the printer without
disassembling it, contact your Fuji Xerox
or dealers.
Close the cover.
"4.2 Loading Paper into a Paper Cassette"
This error may occur when paper is
added before loaded paper is used up.
Remove the paper stack and fan it.
Then, re-load in the paper cassette.
When replenishing paper, make sure
that the already loaded paper is used up.
Chapter 4 "Loading Paper"
Advertisement
Table of Contents
