Table of Contents
Advertisement
5.3 List of Items on the Menu Screen
Menu
IP Filter
Init NVM (NV Memory
Initialisation)
5
114
Perform the settings for IP Filter.
To set IP address and subnet mask for the IP Filter, enter a number
between 0 - 225 in Filter Address and Filter Mask respectively. You
can then select from Accept (Default), Off or Reject in Filter Mode for
the set address.
You can set a maximum of five items and the first setting has top
priority. When setting multiple IP Filters, start from the shortest
address that covers the narrowest coverage.
You can also perform settings for IP Filter via the CentreWare Internet
Services or network utility.
Refer to the Network Print Environment User Guide (pdf file, "Net.pdf")
found in the Software Pack CD-ROM for the setting example.
Filter 1
Filter 2
Filter 3
Filter 4
Filter 5
Initializes the NV memory on the network expansion card.
The NV memory refers to non-volatile memory that stores the printer
settings even when the power is cut off.
This item cannot be set during printing.
Yes
Initialises the NV memory. Once the NV memory is initialised, the
settings in 5 Network menu will be set to their initial values.
The settings will not take effect if you do not restart the system. After the
setting, you have to switch off the printer and then switch it on again.
No
Return to the menu without initialising the NV memory.
Description
Advertisement
Table of Contents
