Connecting Cables - Patton SmartNode 1000 Series Getting Started Manual

6 • SmartNode 2300 installation
3. Install the unit into the rack using the user-provided rack mounting hardware.

Connecting cables

Installing SmartNode 2300 cables takes place in the following order:
1. Installing the 10Base-T Ethernet cable into port ETH 0/1 or 10/100Base-T Ethernet cable into port ETH
0/0 (see figure 57) (see
2. Installing the serial interface cable into port SERIAL 0/0 (see
page 98)
3. Installing the interface card cables (see
4. Installing the power cord (see
96
Figure 57. SmartNode 2300 connectors
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
The Interconnecting cables shall be acceptable for external use and shall be
rated for the proper application with respect to voltage, current, anticipated
temperature, flammability, and mechanical serviceability
"Installing the Ethernet cables"
"Installing the interface card cables"
"Installing the power cord"
SmartNode 1000 and 2000 Series Getting Started Guide
on page 97)
"Installing the serial interface cable"
on page 101)
on page 107)
on

Connecting cables