Connecting Cables - Patton SmartNode 1000 Series Getting Started Manual

7 • SmartNode 2400 installation

Connecting cables

Installing SmartNode 2400 cables takes place in the following order:
1. Installing the 10Base-T or 100Base-T Ethernet cables into ports ETH 0/1 and ETH 0/0 (see
"Installing the Ethernet cables"
2. Installing the interface card cables (see
3. Installing the power cord (see
114
Figure 71. SmartNode 2400 connectors
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
The Interconnecting cables shall be acceptable for external use and shall be
rated for the proper application with respect to voltage, current, anticipated
temperature, flammability, and mechanical serviceability
on page 115).
"Installing the interface card cables"
"Installing the power cord"
SmartNode 1000 and 2000 Series Getting Started Guide
on page 116).
on page 123).
figure 71) (see

Connecting cables