Patton SmartNode 1000 Series Getting Started Manual page 89

SmartNode 1000 and 2000 Series Getting Started Guide
Note
Connecting cables
The PM-BRI-EXT is connected to the S-Bus via an S-Bus multi-
socket.(see figure 53).
Do not plug the Phantom power supply directly into any other port than BRI 0.
Installing it on the Ethernet ports or Console port could result in serious equip-
ment damage.
Figure 53. SmartNode 1400 external 40-VDC power supply
5 • SmartNode 1400 installation
89