10 • Getting Started with the SmartNode Device
Diagnostic
Diagnostic offers three actions:
•
Ping an IP address
•
Test various sectors of the flash memory
•
Delete the contents of the embedded file system
To access the Diagnostic domain, type sd 2.
Type help to display a list of the available commands in the Diagnostic domain (see
The command
ping
allows you to verify the IP connectivity within a network.
You can test the various sectors of the SmartNode flash memory with the command
Use the command
eraseefs
Additional information
For detailed information about configuring and operating guidance, set up procedures, and troubleshooting,
refer to the Software Configuration Guide on the enclosed CD-ROM. On the CD you will also find a freeware
TFTP server, which is also available from the http://solarwinds.net/ web site.
150
Figure 94. Diagnostic Display
to delete the contents of the EFS.
SmartNode 1000 and 2000 Series Getting Started Guide
figure
94).
.
flashtest
Additional information