SmartNode 1000 and 2000 Series Getting Started Guide
Do the following to mount a SmartNode 2300 in a 19-inch rack:
1. Locate the two angled mounting brackets included in the installation kit pack. The bracket (see
is designed so you can have the 1.5 cm flange facing to the front or to the rear. There are four holes for
countersunk screws on the long side of the bracket.
Figure 56. SmartNode 2300 rack mounting bracket location holes
2. Attach a bracket to each side of the SmartNode 2300 with the four self-tapping screws provided. There are
three mounting positions for the brackets (positions A, B, and C as shown in
choose the one that best suits your requirements.
Mounting the SmartNode 2300
6 • SmartNode 2300 installation
figure 56
on page 95), so
figure
56)
95