Patton SmartNode 1000 Series Getting Started Manual page 77

SmartNode 1000 and 2000 Series Getting Started Guide
Note
Connecting cables
The following installation options are available:
•
In the absence of an NT the PM-BRI-EXT may be connected
directly to the BRI 0 port on the SmartNode (see
terminals are connected to the BRI 1 port.
•
The PM-BRI-EXT is connected to the S-Bus via an S-Bus multi-
socket (see figure 44
Do not plug the Phantom power supply directly into any other port than BRI 0.
Installing it on the Ethernet ports or Console port could result in serious equip-
ment damage.
Figure 43. SmartNode 1200 external 40-VDC power supply
on page 78).
4 • SmartNode 1200 installation
figure 43). The
77