Table 5-3: M9110Ah Setup - Teledyne 9110AH Instruction Manual

TELEDYNE Model 9110AH NO
Table 5-3: M9110AH Setup Menu
Level 1 Level 2
DAS
VIEW
RANGE
MODE
OFFS
UNIT
SET
DIL
Analyzer Operator Manual, 01620, Rev. F
X
Level 3 Level 4 Level 5
PREV-
NEXT
EDIT UP
UP10
DOWN
DOWN10
SING
AUTO
REM
IND
PPM
MGM
IF SET
SINGLE
IF LO/HI
AUTO
OR REM
IF NO NOX
INDEP NO2
5-7
Description
Data Acquisition menu
Select which DAS data collector to view
Scroll through data collectors CONC,
PNUMTC, CAL DAT
Examine the DAS data buffer
Move UP 10 averages in the DAS data
buffer
Examine the DAS data buffer - move
down and display next average
Move DOWN 10 averages in the DAS
data buffer
Sets the output range
Type of range output
All 3 outputs are on the same single range 5.3.4.1
All 3 outputs AutoRange between 2
different ranges
Same as AutoRange, except external
contacts set range
Each range can be set independently
Allows a offset bias voltage to all analog
output channels
Unit selection menu
Selects PPM units
Selects milligrams per cubic meter units
Sets the range of the instrument if in
SINGLE range mode
Sets the low and high ranges for
AUTORANGE or Remote Range.
Sets each INDEPENDENT range.
Sets dilution factor.
Reference
Section
5.3.3
5.3.3
5.3.4
5.3.4
5.3.4.2
5.3.4.2
5.3.4.3
5.3.6
5.3.4.5
5.3.4.5
5.3.4.5
5.3.4.1
5.3.4.2
5.3.4.4