To Perform Re-Sewing From The Start - JUKI AMS-210EN/IP-420 Instruction Manual

(2) To perform re-sewing from the start

G
D
F
1 Release the error.
Press RESET button
2 Perform thread trimming.
Press THREAD TRIM button
ming.
When PRESSER UP button
goes up. Turn OFF the power since the operation afterwards
A
cannot be performed.
When thread trimming is performed, INTERMEDIATE
PRESSER UP/DOWN button
button D , FEED FORWARD button
RETURN TO ORIGIN button
screen.
1. When the presser is raised and the operation is
stopped on the way because of the trouble of for-
B
getting to enter the bobbin case or the like, press
PRESSER UP button
power.
2. PRESSER UP button
the presser is of pneumatic type.
3 Return to the origin.
When RETURN TO ORIGIN button
pop-up is closed, the sewing screen is displayed and the ma-
chine returns to the position of the start of sewing.
4 Perform again the sewing work from the start.
When the pedal is depressed, sewing starts again.
E
C
– 46 –
A to release the error.
B to perform thread trim-
G is pressed, the presser
C , FEED BACKWARD
E , and
F are displayed in the
G and turn OFF the
G is not displayed when
F is pressed, the