JUKI AMS-210EN/IP-420 Instruction Manual page 62

Button and display
INTERMEDIATE PRESSER
F
SETTING button
RETURN TO ORIGIN button
G
PATTERN NO. display
H
SEWING SHAPE display
I
SEWING SHAPE NO. display
J
Y ACTUAL SIZE VALUE display
K
Y SCALE RATE display
L
TOTAL NO. OF STITCHES OF
M
SEWING SHAPE display
NEEDLE THREAD TENSION
N
SETTING button
TRAVEL AMOUNT IN X
O
DIRECTION display
COUNTER VALUE CHANGE
P
button
COUNTER CHANGEOVER
Q
button
STEP SEWING button
R
FOLDER NO. display
S
SPEED variable resistor
T
MAX. SPEED LIMITATION
U
display
TRAVEL AMOUNT IN Y
V
DIRECTION display
PATTERN REGISTER button
W
The intermediate presser is lowered and the intermediate presser reference
value change screen is displayed./ Refer to.
data" p.40.
Presser is returned to the start of sewing and is raised at the time of
temporary stop.
Pattern button No. being sewn is displayed.
Sewing shape being sewn is displayed.
Kind of sewing and sewing shape No. which are registered to the pattern
being sewn are displayed.
Actual Y size value which is registered to the pattern button No. being
selected is displayed.
Y scale rate which is registered to the pattern button No. being sewn is
displayed.
Total number of stitches of sewing shape which is registered to the pattern
button No. being sewn is displayed.
Needle thread tension value which is set to the pattern data being selected
at present is displayed on this button and when the button is pressed, the
item data change screen is displayed.
"@-2-6. Changing item data" p.40.
/ Refer to.
Travel amount in X direction which is registered to the pattern button No.
being sewn is displayed.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
"@-2-12. Using counter"
/ Refer to
The counter display can be changed over among the sewing counter, No.
of pcs. counter and bobbin counter./ Refer to
p.49.
The step sewing screen is displayed. Checking the pattern shape can be
performed.
"@-2-7. Checking pattern shape"
/ Refer to
Folder No. in which the displayed pattern register buttons are stored is
displayed.
Number of revolutions of the sewing machine can be changed.
Maximum speed limitation which is registered to the pattern button No.
being sewn is displayed.
Travel amount in Y direction which is registered to the pattern button No.
being sewn is displayed.
Pattern button which is stored in S FOLDER NO. is displayed.
"@-2-15. Performing new register of pattern button"
/ Refer to
– 58 –
Description
"@-2-6. Changing item
p.49.
"@-2-12. Using counter"
p.42.
p.54.