To Perform Re-Sewing From The Start; When Setting Of Sewing Product Is Difficult Because Of Interruption Of Needle Tip - JUKI AMS-210E-1306 Instruction Manual

(2) To perform re-sewing from the start

G
D
2-10. When setting of sewing product is difficult because of interruption of needle tip
A
1 Release the error.
Press RESET button
sewing screen is displayed.
2 Perform thread trimming.
Press THREAD TRIM button
trimming.
When PRESSER UP button
goes up. Turn OFF the power since the operation afterwards
A
cannot be performed.
When thread trimming is performed, INTERMEDIATE
PRESSER UP/DOWN button
button D , FEED FORWARD button
RETURN TO ORIGIN button
screen.
1. When the presser is raised and the operation is
B
stopped on the way because of the trouble of
forgetting to enter the bobbin case or the like,
press PRESSER UP button
OFF the power.
2. PRESSER UP button
when the presser is of pneumatic type.
3 Return to the origin.
When RETURN TO ORIGIN button
pop-up is closed, the sewing screen is displayed and the
C machine returns to the position of the start of sewing.
E
4 Perform again the sewing work from the start.
When the pedal is depressed, sewing starts again.
F
1 Display the pattern button move screen.
When PATTERN BUTTON MOVE button
the pattern button move screen is displayed.
– 41 –
A to release the error and the
B to perform thread
G is pressed, the presser
C , FEED BACKWARD
E , and
F are displayed in the
G and turn
G is not displayed
F is pressed, the
A is pressed,