JUKI AMS-210EN/IP-420 Instruction Manual page 95

[ When setting 2-step stroke position of pattern button ]
B
In case of the pattern button, 2-step stroke position can be set to
each pattern button data.
1 Display the data input screen at the time of pattern button
selection.
Only in case of data input screen (blue) at the time of pattern
selection, the contents of pattern can be changed. Incase of
A
sewing screen (green), press READY key
data input screen at the time of pattern button selection.
2 Display the pattern data change screen.
Press PATTERN BUTTON DATA CHANGE button
and the pattern button data change screen is displayed.
3 Display 2-step stroke position setting screen.
Press 2-STEP STROKE POSITION CHANGE button
B and the 2-step stroke position setting screen is displayed.
Input possible range of 2-step stroke position depends on the
presser types.
– 91 –
to display the
A