Safety Switch; Installing The Throat Plate Auxiliary Cover - JUKI AMS-210EN/IP-420 Instruction Manual

3-5. Safety switch

3-6. Installing the throat plate auxiliary cover

WARNING :
Be careful not to bump your head or any other parts of your body against the throat plate auxiliary
cover when you bend over your work.
[Area 1306]
8
1
1
2
7
2
3
4
6
4
5
– 6 –
Remove tape 2 fixing the lever section of safety
switch 1 .
1. When using the safety switch
without removing tape 1 , it is very
dangerous since the sewing ma-
chine works even in the state that it
is tilted.
2. In case error 302 occurs when the
sewing machine works after setup,
loosen the safety switch 2 fitting
screw with a screwdriver, and lower
the switch to the downside of the
sewing machine.
[When using area 1306]
1) Temporarily fix throat plate auxiliary
cover supports A 2 and B 3 to the
machine bed with setscrews (M5) 6 .
2) Move the cloth feed base to the rear,
and place throat plate auxiliary cover
1 from between lower plate 7 and
throat plate 8 . At this time, be careful
not to bend lower plate 7 .
3) Fix throat plate auxiliary cover 1 with
throat plate auxiliary cover setscrews
5 and washers 4 .