JUKI AMS-210EN/IP-420 Instruction Manual page 60

Button and display
SEWING SHAPE NO.
G
TOTAL NO. OF STITCHES
H
2-STEP STROKE display
I
THREAD TENSION display
J
TRAVEL AMOUNT IN X
K
DIRECTION display
TRAVEL AMOUNT IN Y
L
DIRECTION display
X ACTUAL SIZE VALUE display
M
X SCALE RATE display
N
Y ACTUAL SIZE VALUE display
O
Y SCALE RATE display
P
MAX. SPEED LIMITATION
Q
PATTERN BUTTON EDIT button
R
FOLDER NO. display
S
FOLDER SELECTION button
T
SEWING SHAPE SELECTION
U
DATA INPUT SCREEN DISPLAY
button
PATTERN button
V
PRESSER DOWN button
W
Sewing shape which is registered to the pattern button No. being selected
is displayed. There are 4 kinds below of the kinds of sewing shape.
: Users' pattern
: Vector format data
: M3 data
: Sewing standard format
* Be sure to use the media that has been formatted with IP-420.
For the formatting procedure of the media, refer to
"@-2-28. Performing formatting of the media" p.89.
Total number of stitches of the pattern which is registered to the pattern
button No. being selected is displayed.
2-step stroke value registered to the pattern button No. being selected is
displayed.
Thread tension value which is registered to the pattern button No. being
selected is displayed.
Travel amount in X direction which is registered to the pattern button No.
being selected is displayed.
Travel amount in Y direction which is registered to the pattern button No.
being selected is displayed.
X actual size value which is registered to the pattern button No. being
selected is displayed.
X scale rate which is registered to the pattern button No. being selected is
displayed.
Y actual size value which is registered to the pattern button No. being
selected is displayed.
Y scale rate which is registered to the pattern button No. being selected is
displayed.
Maximum speed limitation which is registered to the pattern button No.
being selected is displayed.
Pattern button edit screen is displayed.
Folder No. in which the displayed pattern buttons are stored is displayed.
Folders to display the pattern button are displayed in order.
Sewing shape data input screen is displayed.
"@-2-4.(1) Sewing shape data input screen" p.34.
/ Refer to
Pattern buttons stored in S Folder No. are displayed.
"@-2-15. Performing new register of pattern button"
/ Refer to
Presser can be lowered and the presser down screen is displayed.
To raise the presser, press the presser up button which is displayed in the
presser down screen.
– 56 –
Description
p.54.