How To Use Temporary Stop; To Continue Performing Sewing From Some Point In Sewing - JUKI AMS-210EN/IP-420 Instruction Manual

2-9. How to use temporary stop

1

(1) To continue performing sewing from some point in sewing

G
D
F
When TEMPORARY STOP switch 1 is pressed
during sewing, the sewing machine can be
stopped. At this time, the error screen is displayed
to inform that the stop switch has been pressed.
1 Release the error.
Press RESET button
2 Perform thread trimming.
Press THREAD TRIM button
trimming.
When PRESSER UP button
A
goes up. Turn OFF the power since the operation afterwards
cannot be performed.
When thread trimming is performed, INTERMEDIATE
PRESSER UP/DOWN button
button D , FEED FORWARD button
RETURN TO ORIGIN button
screen.
1. When the presser is raised and the operation is
B
stopped on the way because of the trouble of for-
getting to enter the bobbin case or the like, press
PRESSER UP button
power.
2. PRESSER UP button
the presser is of pneumatic type.
3 Adjust the presser to the re-sewing position.
When FEED BACK button
returns stitch by stitch and when FEED FORWARD button
E is pressed, it advances stitch by stitch. Move the presser to the
E
re-sewing position.
C
4 Re-start the sewing.
When the pedal is depressed, sewing starts again.
– 45 –
A to release the error.
B to perform thread
G is pressed, the presser
C , FEED BACKWARD
E , and
F are displayed in the
G and turn OFF the
G is not displayed when
D is pressed, the presser