To Perform Re-Sewing From The Start - JUKI AMS-224EN4530R Instruction Manual

(2) To perform re-sewing from the start

D
F
① Release the error.
Press RESET button
A
② Perform thread trimming.
Press THREAD TRIM button
ming.
When thread trimming is performed, INTERMEDIATE
PRESSER UP/DOWN button
B
D, FEED FORWARD button
button
RETURN TO ORIGIN button
screen.
To interrupt sewing due to any trouble such as the ab-
sence of bobbin case in the hook, turn the power OFF.
③ Return to the origin.
When RETURN TO ORIGIN button
pop-up is closed and the sewing screen is displayed. Then the
needle returns to the start of sewing and the presser goes up.
④ Perform again the sewing work from the start.
E
When the pedal is depressed, sewing starts again.
C
– 31 –
A to release the error.
B to perform thread trim-
C, FEED BACKWARD
E, and
F are displayed in the
F is pressed, the