Changing Contents Of Pattern Button - JUKI AMS-210EN/IP-420 Instruction Manual

2-18. Changing contents of pattern button

K
I
H
D
L
F
When pressing each button of B through H and J , the item data input screen is displayed. When the
buttons of I and K are pressed, Folder Nos. and With/without thread clamp are changed over.
* B Scale rate in X direction and C Scale rate in Y direction can be changed to the actual size value
input by selection of memory switch
* Max. input range and initial value of max. speed limitation D are determined with memory switch
.
* The input range of travel amount in X direction F and travel amount in Y direction G differs accord-
ing to the sewing range.
1 Display the data input screen at the time of pattern button
selection.
Only in case of the data input screen (blue) at the time of pat-
tern selection, it is possible to change the contents of pattern.
In case of the sewing screen (green), press READY switch
to display the data input screen at the time of pattern
A
button selection.
2 Display the pattern button data change screen.
When PATTERN BUTTON DATA CHANGE button
pressed, the pattern button data change screen is displayed.
3 Display the input screen of the item data you desire to
change.
J
Data that can be changed are 11 items below.
Item
B
Scale rate in X direction
B
C
Scale rate in Y direction
C
E
Thread tension
D
G
Max. speed limitation
E
Travel amount in X
F
direction
Travel amount in Y
G
direction
Sewing shape
H
Folder No.
I
Intermediate presser
J
Thread clamp
K
2-step stroke height
L
.
– 61 –
Input range
1.0 to 400.0(%)
1.0 to 400.0(%)
0 to 200
200 to 2800(sti/min)
1306 : –66.0 to +66.0 (mm)
1510 : –76.0 to +76.0(mm)
2210 : –111.0 to +111.0(mm)
1306 : –31.0 to +31.0(mm)
1510 : –51.0 to +51.0(mm)
2210 : –51.0 to +51.0(mm)
-
1 to 5
0.0 to 3.5 (mm)
(Max. 0.0 to 7.0 (mm))
With/without
Motor-driven type : 50 to 90
Air-driven type : 10 to 300
A is
Initial value
100.0
100.0
Pattern set value
2800
0.0
0.0
-
-
Pattern set value
With
70
35