Releasing Procedure Of The Warning - JUKI AMS-210EN/IP-420 Instruction Manual

(2) Releasing procedure of the warning

3 Perform clearing remaining time up to the replacement.
When button C of the item you desire to clear is pressed, the
time of replacement clear screen is displayed. When CLEAR
button F is pressed, the remaining time up to the re-
placement is cleared.
F
4 Display the threading diagram.
G
When threading button
and inspection screen is pressed, the needle thread threading
diagram is displayed.
Observe it when performing threading.
When the designated inspection time is reached, the warning
B
screen is displayed.
In case of clearing the inspection time, press CLEAR button
A . The inspection time is cleared and the pop-up is closed. In case
A
of not clearing the inspection time, press CANCEL button
and close the pop-up. Every time one sewing is completed, the
warning screen is displayed until the inspection time is cleared.
Warning Nos. of the respective items are as follows.
• Needle replacement
• Cleaning time
• Oil replacement time
For the grease-up portion, refer to the item of
"#-1-12. Replenishing the designated places with
grease" p.122.
– 84 –
G displayed in the maintenance
: A201
: A202
: A203
B