To Perform Re-Sewing From The Start - JUKI AMS-220EN / IP-420 Instruction Manual

(2) To perform re-sewing from the start

G
D
F
① Release the error.
Press RESET button
② Perform thread trimming.
Press THREAD TRIM button
ming.
When PRESSER UP button
goes up. Turn OFF the power since the operation afterwards
A
cannot be performed.
When thread trimming is performed, INTERMEDIATE
PRESSER UP/DOWN button
D, FEED FORWARD button
button
RETURN TO ORIGIN button
screen.
1. When the presser is raised and the operation is
stopped on the way because of the trouble of for-
B
getting to enter the bobbin case or the like, press
PRESSER UP button
er.
2. PRESSER UP button
the presser is of pneumatic type.
③ Return to the origin.
When RETURN TO ORIGIN button
pop-up is closed, the sewing screen is displayed and the ma-
chine returns to the position of the start of sewing.
④ Perform again the sewing work from the start.
When the pedal is depressed, sewing starts again.
E
C
– 47 –
A to release the error.
B to perform thread trim-
G is pressed, the presser
C, FEED BACKWARD
E, and
F are displayed in the
G and turn OFF the pow-
G is not displayed when
F is pressed, the