JUKI AMS-210EN/IP-420 Instruction Manual page 32

■ Removing the CompactFlash (TM)
5) USB port
■ Inserting a device into the USB port
■ Disconnecting a device from the USB port
Cautions when using the media
• Do not wet or touch it with wet hands. Fire or electric shock will be caused.
• Do not bend, or apply strong force or shock to it.
• Never perform disassembling or remodeling of it.
• Do not put the metal to the contact part of it. Data may be disappeared.
• Avoid storing or using it in the places below.
Place of high temperature or humidity / Place of dew condensation /
Place with much dust / Place where static electricity or electrical noise is likely to occur
1) Hold the panel by hand, open the cover, and
1
2) When the media 2 is drawn out as it is, re-
2
Slide the top cover and insert the USB device into
the USB port. Then, copy data to be used from the
USB device onto the main body.
After completion of copying the data, remove the
USB device.
Remove the USB device. Put the cover back in
place.
– 28 –
press the media 2 removing lever 1 . The
media is eject.
When the lever 1 is strongly pressed,
the media 2 may be broken by pro-
truding and falling.
moving is completed.