Table of Contents
Advertisement
(2) To perform re-sewing from the start
2-4-9. Display of the flag during the change procedure
If the thread tension command or intermediate presser height increase/decrease value command for
the needle entry point in a user pattern or medium pattern is edited, it will be regarded as a temporary
change and will not be reflected to the original pattern. In this case, "*" (asterisk) mark is attached to the
pattern type display indicating that a change has been made.
If you try to select another pattern while the pattern type display is attached with "*" mark, "M523:
Changed content saving confirmation screen" will be displayed.
When ENTER button
displayed after saving the changed content.
When CANCEL button
case, the screen returns to the previous screen.
① Release the error
Press RESET button
When the error is reset, the thread trimming screen is dis-
played.
② Perform thread trimming
Press THREAD TRIM button
ming.
When thread trimming is carried out, the sewing shape confir-
A
mation screen is displayed.
B
is pressed, the changed content is cancelled or the newly selected pattern is
is pressed, changeover to the newly selected pattern is cancelled. In this
A to release the error.
C
③ Returning to the sewing start po-
sition
When FEEDING FRAME INITIAL
POSITION button
the sewing shape confirmation screen
is closed and the sewing screen is dis-
played. At this time, the feeding frame
returns to the sewing start position.
④ Perform again the sewing work
from the start
When the pedal is depressed, sewing
starts again.
– 56 –
B to perform thread trim-
C is pressed,
Advertisement
Table of Contents
