JUKI AMS-210EN/IP-420 Instruction Manual page 8

(2) Connecting the power source cord
The factory default voltage type is indicated on the voltage indication plate. Connect the cord in ac-
cordance with the specifications.
Voltage caution seal
Rating label
• Connecting single phase
200V, 220V, 230V and 240V
AC200 V, AC220 V
AC230 V, AC240 V
Brown
Green/Yellow
– GND
Table
Brown
Green/
Yellow
Control box
Electric shock
warning label
Voltage indication seal (3-phase type only)
Light blue
Power source cord
Light blue
Power switch
Green/
Yellow
Light blue
Brown
Plug
1. Never use under the wrong volt-
age and phase.
2. When changing the voltage, refer
to the item of
"#-1-11. Changing the voltage of
100,/200V"
• Connecting three phase
200V, 220V and 240V
AC200 V, AC220 V, AC240 V
Green/Yellow
– GND
Table
Red
Red
Green
Control box
– 4 –
p.121.
Black
Red White
Black White
Power switch
White
Black
Plug
Green/
Yellow