JUKI AMS-210EN/IP-420 Instruction Manual page 105

No.
Intermediate presser with/without control
Without
(Lowering fixed)
Intermediate presser lowering timing
Immediately before start-up of
machine head
Intermediate presser : wiper sweeping position
Sweeping above
intermediate presser
With/without air pressure detection
Without
Intermediate presser DOWN position setting
/ Refer to
"!-4-8. Intermediate presser height"
With/without needle cooler control
Without
Grease-up error
Clearing of number of stitches of grease-up is
performed.
/ Refer to "#-1-12. Replenishing the
designated places with grease"
Language selection
Japanese
Spanish
Portuguese
Indonesian
Item
With (Lowering with
sewing data at the time of
operation)
Synchronized
with the last
feeding frame
Sweeping above
intermediate presser
(position where
intermediate presser
lowers most)
With
p.22.
With
p.122.
English Chinese
(traditional)
Italian French
Turkish Vietnamese
Russian
– 101 –
Setting range
With (Lowering even at
the time of feed forward/
backward)
Sweeping below
intermediate
presser
Chinese
(simplified)
German
Korean
Edit unit
--- ---
--- ---
--- ---
--- ---
0 to 7.0mm 0.1
--- ---
--- ---