Threading The Machine Head; Installing And Removing The Bobbin Case - JUKI AMS-210EN/IP-420 Instruction Manual

4-4. Threading the machine head

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start or
the sewing machine.
AMS-210ENSS
AMS-210ENSL

4-5. Installing and removing the bobbin case

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start or
the sewing machine.
In addition, be sure to close the hook cover when re-starting the sewing machine so as to prevent
personal injury or death.
AMS-210ENHS
AMS-210ENHL
3
1
2
1) Open hook cover 1 .
2) Raise latch 3 of bobbin case 2 , and remove
the bobbin case.
3) When entering bobbin case, insert it with the
latch tilted until "click" sounds.
If it is not fully inserted, bobbin case
2 may slip off during sewing.
– 20 –