Initial Value List - JUKI AMS-210EN/IP-420 Instruction Manual

3-2. Initial value list

No.
Maximum sewing speed
Sewing speed of 1st stitch (In case of with thread clamp)
Sewing speed of 2nd stitch (In case of with thread clamp)
Sewing speed of 3rd stitch (In case of with thread clamp)
Sewing speed of 4th stitch (In case of with thread clamp)
Sewing speed of 5th stitch (In case of with thread clamp)
Thread tension of 1st stitch (In case of with thread clamp)
Thread tension setting at the time of thread trimming
Thread tension changeover timing at the time of thread trimming
Sewing speed of 1st stitch (In case of without thread clamp)
Sewing speed of 2nd stitch (In case of without thread clamp)
Sewing speed of 3rd stitch (In case of without thread clamp)
Sewing speed of 4th stitch (In case of without thread clamp)
Sewing speed of 5th stitch (In case of without thread clamp)
Thread tension of 1st stitch (In case of without thread clamp)
Thread tension changeover timing at the time of sewing
start (In case of without thread clamp)
Counter motion selection
Height of eight of presser at the time of 2 step stroke
Buzzer sound can be prohibited.
Number of stitches of thread clamp release is set.
Clamping timing of thread clamp can be delayed.
Thread clamp control can be prohibited.
Feed motion timing is selected.
State of the presser after end of sewing is selected.
Presser lifting motion at the end of sewing can be set.
Origin retrieval can be performed every time after end of sewing
(other than combination sewing).
Origin retrieval in combination sewing can be set.
State of presser when sewing machine stops by temporary
stop command can be selected.
Needle stop position is set.
Item
– 102 –
Initial value
SS/HS SS/HS SL/HL
1306 1510 1306
2800
900
2800
2800
2800
2800
200
0
0
200
600
1000
1500
2000
0
–5
70
2
0
3
SL/HL SL/HL
1510 2210
35