Creating Procedure Of The Combination Data - JUKI AMS-210EN/IP-420 Instruction Manual

(2) Creating procedure of the combination data

A
C
F
I
1 Display the data input screen.
Only in case of the data input screen (pink) it is possible to in-
put the combination data. In case of the sewing screen (green),
press READY switch
(pink).
Pattern No. has not been registered in the initial state, and the
first pattern selection button is displayed in the blank state.
2 Display the pattern No. selection screen.
When PATTERN SELECTION button
pattern No. selection screen is displayed.
3 Select the pattern No.
When UP/DOWN SCROLL button
pattern No. buttons C which have been registered are
E
changed over in order.
D
It is also possible to display the pattern No. input screen by
means of NUMBER INPUT button
B
tern No. directly. The contents of pattern data are displayed in
the buttons. Here, press the pattern No. buttons you desire to
select.
4 Determine the pattern No.
When ENTER button
lection screen is closed and the selection is finished.
5 Repeat steps 2 through 4 as many as the number of pat-
tern Nos. you desire to register.
When the first register is determined, the second pattern selec-
tion button
Repeat steps 2 through 4 as many as the number of pattern
Nos. you desire to register.
When UP or DOWN SCROLL button
the PATTERN NO. button can be selected. The selected PAT-
TERN NO. button is displayed in pink
J
When the PATTERN NO. INSERT button
a step is inserted before the pattern No. being selected (dis-
played in pink). When PATTERN NO. button I being dis-
G
played is pressed to select a different pattern No., the pattern
No. is changed over.
H
If the programmed combination data extends over two or
more screens, the next screen can be displayed by means of
SCREEN SCROLL button
– 69 –
to display the data input screen
E is pressed, the pattern No. se-
F is displayed.
.
J
A is pressed, the
B is pressed,
D and input a pat-
G is pressed,
.
is pressed,
H