Installing The Drain Receiver And The Head Support Rubber; Safety Switch - JUKI AMS-210E-1306 Instruction Manual

3-4. Installing the drain receiver and the head support rubber

7
6
6
6
1
4
3
6
2
6
5
1) Fix drain receiver 2 in the installing hole of
table 1 with two setscrews 3 .
2) Screw in drain bin 4 to drain receiver 2 .
3) Insert sewing machine drain pipe 5 into drain
bin 4 .
4) Insert head support rubbers 6 to machine bed 7 .
5) Bundle the cables with clip bands 8 as shown
in the figure. (Excluding air tube)
1. Insert drain pipe 5 until it will
go no further so that it does
not come off drain bin 4 when
tilting the machine head.
2. Remove the tape fixing drain
pipe 5 .
6
– 5 –