Searching
for a photo - PHOTO SEARCH/PHOTO SCAN
(1) Set the POWER switch to VCR.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select CM SEARCH in ['4_]
to OFF, then press the dial (p. 205).
(3) Press SEARCH MODE on the Remote Commander
repeatedly
until the
PHOTO SEARCH indicator appears. The indicator changes as follows:
FDATE SEARCH ---+PHOTO SEARCH ---+PHOTO SCAN ---+ (no indicator) l
(4) Press _
or _
on the Remote Commander
to select the photo for playback.
Each time you press _
or _
your camcorder searches for the previous or
next photo.
Your camcorder automatically
starts playback of the photo.
To stop searching
Press m.
84