Sony DCR-TRV40 Operating Instructions Manual page 116

Labeling a cassette
To erase the label you have made
In step 4 turn the SEL/PUSH EXEC dial to select
I÷l,
tben press tim dial. Tile last
character is erased.
To change the label you have made
Insert the cassette to rbange tile label, and operate in tbe same way to make a new label.
If you set the write-protect tab of the cassette to lock
You cannot label the tape. Slide the write protect tab to release the write protection.
If the tape has too many index signal
You may not be able to label a cassette because tbe cassette memory becomes fi/ll. In
this case, delete data you do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to fotu titles also appear.
When the "-----" indicator has fewer than 10 spaces
The cassette memory is f\dl.
The .... indicates the number of characters you can select fur the label.
To enter a space
Select [ Z& ? ! 1, then select the blank part.
You can erase all the data in cassette memory at once.
(1) Set the POWER switch to CAMERA or VCR.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select ERASE ALL in rill,
then press the dial (p. 205).
(3) Turn the SEL/PUSH EXEC dial to select OK, then press the dial. OK changes
to EXECUTE.
CM SET
T_TLE
T_TLEERASE
r_ T_TLEDSPL
_:_ CM SEARCH
_ TAPE TITLE
*RETU_N
(4) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
ERASING flashes on the screen. When all the data is erased, COMPLETE is
displayed.
To cancel deleting
SelectRETURNwith the SEL/PUSHEXECdial in step 3 oi"4.
116