Viewing Images Recorded On A Tape - Sony DCR-TRV40 Operating Instructions Manual

Connecting your camcorder to your computer using the USB cable
- For Windows users
Viewing images recorded on a tape
Refer to page 181 for details on viewing "Memory Stick" images oil your
eonlputer.
You need to install PIXELA hnageMixer to view images recorded on a tape on your
computer. Install it fl'om tile CD ROM suppliect with your camcorder.
To install and use this software in Winctows 2000 Professional, you must be autborized
as Power Users or Administrators. For Windows XP Home Edition/Professional, you
must be authorized as Administrators.
(1) Turn on your computer and allow Windows to load.
If you are using your coinputer, close all running applications.
(2) Insert the supplied CD-ROM into tim CD-ROM drive of your computer.
The application software starts tip and the title screen appears. If the title
screen does not appear, double click "My Computer" and then "hnageMixer"
(CD-ROM Drive). Tim application software screen appears after a while.
(3) Move the cursor to "PIXELA hnageMixer" and click.
The Install Wizard program starts up and the "Select Settings Language"
screen appears.
(4) Select the language for installation.
(5) Follow tim on-screen messages.
The installation screen disappears when installation is complete.
(6) Click DirectX.
Follow tim on screen messages to install DirectX.
Restart your computer when the installation is completed.
(7) Connect tim AC power adaptor to your camcorder.
(8) Set the POWER switch to VCR.
(9) Select USB STREAM in _ to ON in the menu settings (p. 207).
(10)With tim CD-ROM inserted, connect tim USB jacks of the camcorder and
computer using the USB cable supplied with your camcorder.
Your computer recognizes the camcorder, and the Windows Add Hardware
Wizard starts.
(USB) jack
Push into the end
USB connector
USB cable (supplied)
180