Sony DCR-TRV40 Operating Instructions Manual page 124

Using a "Memory Stick" - Introduction
You can select either of two image sizes
Still images: 1360 × 1020 o1"640 × 480. (When the POWER switch is set to CAMERA
or VCR, the image size is automatically set to 640 × 480.)
The defuult setting is 1360 × 1020.
Moving pictures: 320 × 240 or 160 × 112
The default setting is 320 × 240.
(1) Set the POWER switch to MEMORY/NETWORK (DCR TRV50 only). Make
sure that the LOCK switch is set to the left (unlock) position.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select STILL SET (still
image) or MOVIE SET (n-_oving picture) in _, then press the dial (p. 203).
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
dial.
The indicator changes as follows:
Still images: 1[_860 _ _-640
M°vingpictures:_320 _ _-_160
MENU --
STILL SET
MOVIE SET
MEM©RY SET f_,
_OVlE SET
l_r i ]REMAI_,_ 160, 112
_ _RETURN
E_ RE[CAIN
_ 4osec_]
STILLSET
NEMORY SET 6O
STILL SET
',_ BURST
_-_ QUALIT"
_RETURN
MOVIE SET
MEM©RY SET 2min_ I
_ MOVIE SET
!7........
_ _ RETURN
_ RE[CA1N
124