Sony DCR-TRV40 Operating Instructions Manual page 189

Viewing images recorded on a tape on your computer
- For Windows users
If image data cannot be transferred by the USB connection
Tile ldSB driver has been registered incorrectly as yore computer was connected to your
camcorder before installation of the USB driver was completed. Reinstall tile USB driver
fbllowing the procedure on page 182.
If any trouble occurs
Close all running applications, then restart your computer.
Carry out the following operations after quitting the application:
Disconnect the USB cable.
Change the POWER switch to the other position or set the POWER switch to OFF
(CHG) on your camcorder.
A "PIXELA hnageMixer Ver.l.0 fbr Sony" on line help site is available where you can
find the detailed operating method of "PIXELA ImageMixer Vet. 1.0 for Sony".
(1) Click (_) located in the upper-right corner of the screen.
The ImageMixer's Manual screen appears.
(2) You can find the information you need from the list of contents.
To close on-line help
Click [] at the top right of the screen.
If you have any questions about "PIXELA ImageMixer Ver.l.0 for Sony"
"]mageMixer Ver. 1.0 for Sony" is a trademark of PIXELA corporation. For more
information, reter to the instloction manual of the CD ROM supplied with your
c_lnlcol tier.
iiiiii;;ili;;ili;;ili;;ili;;ili;;ili;;ili;;ili;;
<
g
Communications with your computer
Communications between yotu camcorder and your computer may not recover after
recovering from Suspend, Resume, or Sleep.
189