Superimposing A Title - Sony DCR-TRV40 Operating Instructions Manual

Superimposing a title
If you set the write-protect tab of the cassette to lock
You cannot superimpose o1"erase the title. Slide the write protect tab to release the write
protection.
To use a custom title
If you want to use a custom title, select [_ in step 2.
If the tape has a blank portion
You cannot superimpose a title on the portion.
If the tape has a blank portion between recorded portions
Titles may not be displayed correctly.
Titles superimposed with your camcorder
• Titles are displayed by only the MJ" |]k" DV fbrmat video equipment with an index titler.
• The point you superinlposed the title may be detected as an index signal when ;;
._,
searching a recording with other video equipment.
If the tape has too many index signals
You may not be able to superimpose a title because the cassette memory becomes frill.
In this case, delete data you do not need.
To not display titles
Set TITLE DSPL to OFF in the menu settings (p. 205).
Title setting
• The title color changes as follows:
WHITE *-+ YELLOW *-+ VIOLET *-+ RED *-+ CYAN *-+ GREEN *-+ BLUE
• The title size changes as fbllows:
SMALL *-+ LARGE
You cannot input 13 characters o1" more in LARGE size. If you input more than 12
characters, the title size retmns to SMALL even if you select LARGE.
• If you select SMALL, you have nine choices for the title position.
If you select LARGE, you have eight choices for the title position.
One cassette can have up to about 20 titles, with each title comprisingfive
characters
However, if the cassette memory is full with date, pboto and cassette label data, one
cassette can have only up to about 11 titles each comprising five characters.
Cassette memo W capacity is as follows:
six date data
12 photo data
one cassette label
If the ,,_1 FULL" mark appears
The cassette nlemory is full. Erase tmwanted titles.
111