Audio Dubbing - Sony DCR-TRV40 Operating Instructions Manual

Audio dubbing
You can record audio to add to the original sound on a tape lay connecting audio
equipment or a microphone. If you connect audio equipment, you can add sound to
your recorded tape already recorded in tile 12 bit sound mode by specifying the start
and end points. Tile original sound will not be erased.
Use the Remote Commander for this operation.
Select one of the fbllowing connections to add audio.
MIC
(PLUG IN POWER)
: Signal flow
Microphone (optional)
You can check recorded picture and sound by connecting your camcorder to a TV with
the A/V connecting cable.
Recorded sound is not output flora the speaker. Check the sound by using a TV or
headphones.
Intelligent accessory shoe
Microphone (optional)
106