Sony DCR-TRV40 Operating Instructions Manual page 159

Viewing moving pictures
- MPEG movie playback
You can play back moving pictures recorded on a "Men-loW Stick." You can also play
back six images hlcloding still images in order at a time by selecting the index screen.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR TRV50 only) or VCR.
Make sure that the LOCK switch is set to the left (unlock) position.
(2) Press PLAY or "_ PB.
(3) Press /+ to select the desired inoving pictures.
: To see the previous picture
+ : To see the next picture
(4) Press MPEG _ II to start playback.
(5) To adjust the volume, press either of the two buttons on VOLUME.
: To turn down
+ : To turn up
When you close the LCD panel, sound is muted.
VOLUME
2
o
©
To stop MPEG movie playback
Press MPEG IP _ II.
You may not be able to play back images with your camcorder:
When playing back image data modified on your comptlter.
When playing back image data shot with other equipment.
To play back recorded picutres on a TV screen
• Befbre operation connect your camcorder to the TV with the A/V connecting cable
supplied with your camcorder.
• Turn the audio volume of the TV down bef_ore operation, or noise (howling) may be
output from the TV speakers.
Moving picture
You can select moving pictures also with /+ on PAGE1/PAGE2/PAGE3.
When no image is recorded on the "Memory Stick"
When you press MEMORY PLAY on the Ren-lote Con'aTlaoder, "_ NO FILE" appears.
159