Sony DCR-TRV40 Operating Instructions Manual page 160

Viewing moving pictures - MPEG movie playback
Tile moving picture recorded on 'Memory Stick" is divided into 23 parts.
You can select every each one point and play back pictures.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only) or VCR.
Make sure that tile LOCK switch is set to the left (unlock) position.
(2) Press PLAY or _ PB.
(3) Press +/ to select the desired moving pictures.
: To see tile previous picture
+ : To see tile next picture
(4) Press <-,/,,,1_ to select tile point where you want to play back.
4" :To see previous part
:To see next part
MOVO0001 0 : O0: 00_
(5) Press MPEG ID_ II to start playback.
To stop MPEG movie playback
Press MPEG I_ n.
When recording time is too short
The moving picture may not be divided into 23 parts.
160