Sony DCR-TRV40 Operating Instructions Manual page 202

Changing the default settings with the menu
POWER
Icon/item Mode Meaning switch
VCR SET
HiFi SOUND • STEREO To play back a stereo tape or dual sound track VCR
tape with main and sub sound (p. 221)
1 To play back a stereo tape with the left sound or
a dual sound tape with main sound
2 To play back a stereo tape with tile right sou]ld
or a dual sound track tape with sub sound
To adjust tile balance between tile stereo 1 and VCR
stereo 2 (p. 109)
I l
ST1 A ST2
AUDIO MIX
A/V--*DV OUT • OFF
ON
LCD/VF SET
LeD B,L, • BRT NORMAL
To output digital images and sound in analog
format using your camcorder
To output analog images and sotmd in digital
format using your camcorder (p. 196)
To set tile brightness on the LCD screen to
normal
BRIGHT To brighten the LCD screen
LCD COLOR
To adjust the color on the LCD screen, turn the
SEL/EUSH EXE dial.
VF B.L.
To get low A To get high
intensity intensity
VCR
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK
• BRT NORMAL To set tile brightness on the viewfinder screen to VCR
normal CAMERA
BRIGHT To brighten tile viewfinder screen MEMORY/
NETWORK
Notes on LCD B.L and VF B.L
• When you select BRIGHT, battery life is reduced by about 10 percent during
recording.
• When you use power supplies other than the battery pack, BRIGHT is automatically
selected.
Even if you adjust LCD B.L, LCD COLOR and/or VF B.L
The recorded picture will not be affected.
202